Types of Miter Saw and How to Use Them

Types of Miter Saw

Miter saws currently approach in a large array of sizes and styles, enough in truth where it nearly feels like they shouldn’t all be named miter saws. But the one thing they all have in mutual is the capability to cut angles correctly, the major aim of a miter saw and one they all distribute. Obviously, the more space the saw has, the more it will commonly support you. Miter saw is of four kinds and each kind has been listed here for your guidance.

The Standard Miter Saw

For those who wish to insert baseboard and casing on a home or cut picture frame molding, a normal miter saw is often sufficient. These saws cut standard angles across the grain of the wood. A miter gauge is delivered, letting the saw to be fixed to a precise angle for sawing.

The Compound Miter Saw

When you go up into sawing crown molding, an ordinary miter saw is no longer enough. The exterior corner for crown molding is a compound angle; signifying it’s cut at an angle in both the horizontal and vertical tracks. To achieve this, the saw’s blade and motor must tilt, as well as swing from side to side. With a complex miter, you can saw these angles much effortlessly.

The Sliding Miter Saw

The sliding miter saw contains the cutter head, blade, and motor attached on rails, letting it to move backward and forward, as well as upward and downward. This permits for cutting of bigger work pieces, lumber expended for framing. While the correctness of sliding miter saws let them to be utilized for sawing large molding as well, many of the sliding action is in reality used for accepting the cutting of dimensional lumber on the saw.

The Manual Miter Saw

With all these potent miter saws, it would appear there’s no place left for a manual miter saw, but that is far away from the reality. There are certain applications, like cutting picture frame molding or cutting exceptionally tiny work pieces, like dowel rods which are essentially well done on a good quality manual miter saw, to evade destroying the work piece.

How to Use a Miter Saw

With such a large variety of miter saws on the bazaar, it’s enormously significant to take in consideration what certain models specifications say. This, more than anything else, will regulate what nature of saw you require. While looking at these specifications, contemplate about the biggest work piece you are probable to attempt to cut with the saw, as well as the sort of cuts you want to create; this will govern the size and kind of miter saw you require.

  • At all times saw the factory end from a board before assessing and cutting a portion for easy fit and reduced sanding.
  • Let the saw perform the work; don’t push the blade thru the wood.
  • More teeth mean slicker cuts.
  • Expend a blade with more than 50 teeth for production cuts.
  • For fine cuts, like molding, expend a blade with more than 90 teeth.
  • Treated lumber often has greater moisture substance than construction lumber, so take a lower tooth count still for fine cuts.
  • The bare spaces amid the teeth empty the debris and place reduced strain on the motor.
  • If conceivable, saw one angle end of a part before you stain and saw the opposite end.
  • Buying Guides

Leave a Reply